Mectron combi touch Manual De Uso Y Mantenimiento página 193

Screw in the male coupling supplied with
the "Mectron Water Circuit Cleaning Kit"
in its seat until it comes into contact;
CAUTION: Check the integrity of
the "Mectron Water Circuit Cleaning
Kit". Replace the "Mectron Water Circuit
Cleaning Kit" in case of wear or damage.
If previously disconnected (for example,
for cleaning), connect the hose supplied
with the kit to the male water coupling;
Connect the power supply cable to the
device (Ref. 1) and to a wall socket (Ref.
2). Switch the device on using the switch
located at the back (Ref. 3);
Extract the quick coupling on the cord
of the air-polishing handpiece and place
it above a container or sink to catch the
liquid released during the procedure;
CLEANING AND STERILISATION
8
KIT
9
KIT
10
11
3
1
2
53