Mectron combi touch Manual De Uso Y Mantenimiento página 173

Press the pedal for a moment to start the
cycle. The "flush" function and selected
irrigation type LEDs will flash. The
performance of the cycle is indicated with
brief sequence acoustic signals.
The cycle lasts 23 seconds, but can be
interrupted by pressing the pedal as
soon as the liquid starts coming out of
the handpiece.
At the end of the "flush" cycle, the device
becomes available again with the most
recently used configuration;
Screw in the preselected insert on the
combi touch handpiece until it comes
into contact;
Tighten the insert using the Mectron
torque wrench.
For correct use of the Mectron torque
wrench, proceed as follows:
• Place the insert inside the torque
wrench, as shown;
2
3
4
USE
33