Daub DR Robot Variomatic Manual De Usuario página 53

7.5. Starting the rounding process
Figure Start the rounding process
8
1. Press and hold the two start buttons simultaneously until the pressing ring is completely
against the rounding plate. See figure 8.
The machine will start.
ATTENTION
• If the start buttons are released prematurely, the ring will move up.
• If the result is not satisfactory, the settings can be changed. See section 2.6.2..
7.6. Saving a program
Press the P-key to save the current settings under a program number.
ATTENTION
The final result depends on the dough consistency. With more experience and use you will attain
the best final result. See section 2.6.2..
7.7. Assessing the result
The following information will help you to obtain the best possible result.
When operating the machine, always observe the following adjustment options: volume, pressing
time and rounding time.
DR Robot Variomatic | User manual
53
www.daub.nl