Cleaning - Procusini mini Manual

10. Cleaning

10.1. Stainless Steel Cartridge
Remove the refill sleeve with tweezers before cleaning, refilling the cartridge
and at the end of production.
The empty cartridge can then be washed in the dishwasher or under warm
running water. After cleaning, dry the cartridge thoroughly (also inside).
10.2. Printing table
The printing table is magnetically fixed to the device.
To clean it, pull it out of the device towards the front.
10.3. Silikone Mat
Clean the silicone mat under warm running water.
10.4. Cartridge Holder
Clean the cartridge holder with a damp kitchen towel.
NOTE
!
• Clean the printing table and silicone mat by hand.
• Use only moderately warm water.
• Do not use scouring pads or abrasive cleaners.
• Do not cut on the silicone mat or print table.
• Do not clean the cartridge holder under running water!
10.5. Piston ­ Fast cleaning
Select "Menu" and press "Clean". The piston moves
out a little. Follow the instructions on the display.
10.6. Piston ­ Advanced cleaning
Remove the piston completely to clean it thoroughly under warm running
water.
To do this, use the function Piston out under "Menu", "More".
To reinsert the piston, select the function Piston in.
Place the piston in its original position and hold it in position until it is
automatically retracted.
+
+ + +
24