Mectron MULTIPIEZO Manual De Uso página 20

CORRECT
NOT CORRECT
click!
Screw the chosen insert onto the multipiezo
5
handpiece, until it reaches the limit stop;
Tighten the insert by using the Mectron
6
torque wrench.
To correctly use the Mectron torque wrench,
operate as follows:
Put the insert inside the wrench as shown;
7
Firmly hold the central body of the
8
handpiece;
CAUTION:The handpiece must not be
grabbed by its terminal part and/or cord,
but only by its central body.
The handpiece must not be rotated, but
must be grasped firmly, and you must
only rotate the wrench.
Rotate the wrench clockwise until the
friction snaps (the external body of the
wrench rotates compared to the handpiece,
emitting mechanical "CLICK" sounds).
The insert is now perfectly tightened;
05 Û USE
EN
19