Description Of The Keyboard - Mectron MULTIPIEZO Manual De Uso

05 Û USE
05.2 Û DESCRIPTION OF THE KEYBOARD
Touch keyboard
The user can configure the device by simply
touching on the touch keyboard.
Depending on the selected setting, the
EN
electronic feedback system automatically
adjusts the correct operating frequency.
POWER N
(ref. inside cover)
The power can be adjusted by selecting
the numbers on the touch keyboard in the
"power" column. 7 power levels are foreseen:
0 = the handpiece has no power: only the
irrigation outflows from the handpiece.
From 1 to 6= the power can be increased in an
incremental way.
The power level can be regulated in each
function, as indicated here below:
ENDO - 7 power levels: from 0 to 6
PERIO - 7 power levels: from 0 to 6
SCALER - 7 power levels: from 0 to 6
FILLING AND FLUSHING THE IRRIGATION
CIRCUIT O
(ref. inside cover)
The device is equipped with the "PUMP/
FLUSH" key which, depending on the mode of
use, allows to perform the PUMP function or
the FLUSH function.
The PUMP function can be used at the
beginning of the treatment, to flush the entire
irrigation line up to the insert, so that the
treatment can be started with the necessary
irrigation (see Paragraph 05.4).
The FLUSH function (see Chapter 06 - FLUSH
FUNCTION) allows to perform a cleaning cycle
of the irrigation circuit.
This function must be performed when you
have finished using the device and before
cleaning, disinfecting, and sterilizing all
the parts (see Chapter 08 - CLEANING AND
STERILIZATION).
13