Table 13. Sheath Part Numbers; Table 14. Micro Handpiece Blades And Burr Part Numbers - Johnson & Johnson DePuy Synthes FMS VUE II Manual Del Usuario

Part
I/O Flow Sheath - Smith & Nephew (Must be
sterilized before use)
I/O Flow Sheath - Stryker (Must be sterilized before
use)
I/O Flow Sheath - Linvatec (Must be sterilized
before use)
I/O Flow Sheath - Storz (Must be sterilized before
use)
I/O Flow Sheath - Olympus (Must be sterilized
before use)
I/O Flow Sheath - Wolf (Must be sterilized before
use)

Table 14. Micro Handpiece Blades and Burr Part Numbers

NOTE: Not all blades are available at all times. Please contact your DePuy Synthes Sales
Representative for availability.
Part
OMNICUT RESECTION BLADE (Sterile)
ULTRA-AGGRESSIVE BLADE PLUS (Sterile)
FULL-RADIUS BLADE PLUS (Sterile)
MULTI BLADE PLUS (Sterile)

Table 13. Sheath Part Numbers

64
Part Number Instructions for Use
218019 111089
218021 111089
218022 111089
218023 111089
218024 111089
218025 111089
Instructions for
Part Number
Use
283345 110849
283346
283329 110849
283429
283729
283309 110849
283409
283709
283439 110849
283739