Before You Begin - USRobotics 7924C Guia De Instalacion

Before You Begin

Note: For more information, you can also refer to the Support section of the USRobotics Web site:
www.usr.com/support
Note: Your model number is 7924C. It is important that you have your serial number written down
before you install the 24-Port 10/100Mbps Switch. You can find your serial number on the bottom
label of the switch and on the side of the package. If you ever need to call our Technical Support
department, you will need this number to receive assistance.
Step 1. Connect the power cord to the 100-240VAC port on the switch, then
plug the power cord into a standard power outlet.
Step 2. Connect your 24-Port 10/100Mbps Switch to your Ethernet-ready
device.
Congratulations!
The installation of your USRobotics 24-Port 10/100Mbps Switch is
complete. As connections are established with the 24-Port 10/100Mbps Switch, the
corresponding LED lights will turn on. Repeat this step as needed for up to twenty-three
additional devices.
2
2 4 6 8 10 12 14 18 20 22 24
Speed
Link/Act
Speed
Link/Act Power
1
3 5 7 9 11 13 15 17 19 21 23
8
100-240VAC
USRobotics
24 Port 10/100 Ethernet Switch