Power Supply; Step 1: Fit And Charge The Battery; Fitting The Battery - Geemarc iBT10 Manual Del Usuario

POWER SUPPLY

STEP 1: FIT AND CHARGE THE BATTERY

The iBT10 is supplied with a Lithium rechargeable
battery.
NOTE:
Do not use any other type of rechargeable
●
battery with this product.
The battery must be charged for 7 hours
●
before first time use.

Fitting the Battery

IMPORTANT: Before fitting the battery, make
sure the ON/OFF switch on the side of the iBT10
is set to the OFF position.
Take off Belt clip and slide open the battery cover.
Carefully connect the short black (–) and red (+)
lead from the battery to the socket inside the
battery compartment (marked – and +).
Replace the battery cover.
7