Levelling The Machine; Drain Hose - EAS ELECTRIC EMW1056GW Manual De Instrucciones

PRODUCT INSTALLATION

Levelling the Machine

WARNING
The lock nuts on all four feet must be screwed tightly against the housing.
Connect the Water Supply Hose
WARNING
To prevent leakage or water damage, follow the instructions in this chapter.
• Do not kink, crush or modify water
inlet hose.
NOTE
• Connect manually, do not use tools. Check if the connections are tight.

Drain Hose

WARNING
Do not kink or protract the drain hose.
•
• Position drain hose properly ,otherwise damage might result in water leakage.
It is not allowed to remove the buckle of drain pipe.
•
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level
using a spirit level.
Connect the water
supply hose to the
water inlet valve and a
water tap with cold
water as indicated.
14 V.1