Parts And Components; Before Use; Operation - cecotec PROCLEAN 5010 INOX Manual De Instrucciones

1. PARTS AND COMPONENTS

Fig. 1
1. Door safety lock system
2. Microwave window
3. Rotating axis
4. Roller ring
5. Rotary plate
6. Control panel
7. Mica panel
8. Grill

2. BEFORE USE

- Never remove the mica plate.
- Take the product out of the box. If the microwave has a protective film, tear it off before
starting operation. Check carefully if there is any damage, and if there is, immediately
notify the Technical Support Service of Cecotec.
- The product must be placed on a flat, stable and dry place and kept away from corrosive
materials, heat and humidity, such as gas burners or water.
- To ensure enough ventilation, minimum distances have to be kept:
- From the back part to the wall: 10 cm.
- From the side to the wall: 5 cm.
- Free distance from the top surface: 20 cm.
- From the microwave to the ground: 85 cm.
- The product must be placed, at least, at 5 m from the TV, Radio or antenna.
- The product must be placed in such way that the plug is accessible and must ensure an
effective grounding in case of leakage in order to avoid electric shocks.
- The microwave door must be closed in order to operate.
- In case there is any manufacturing rests in the microwave cavity or on the heating elements,
leave the microwave open to ensure good ventilation. In such case, it is recommended to
heat a glass of water at high power for several times.

3. OPERATION

Fig. 2
1. On button
2. Express button
3. Cooking button
PROCLEAN 5010 INOX / 5020 MIRROR
ENGLISH
47