Safety Devices; Safety And Information Signs - Angelo Po 0S0FR3E Manual De Uso

ENGLISH
Even though the appliance is complete with
all safety devices, during the installation and
connection procedures it may be necessary to
supplement it with additional devices to com-
ply with the relevant applicable laws.
The position of the devices is shown in the pic-
ture.
Safety thermostat: cuts off the electricity
A)
supply in case of overheating.
The position of the signs provided is shown in
the picture.
Manufacturer and appliance nameplate.
A)
WARNING: read the manual carefully
B)
before carrying out any procedure.
WARNING: when washing the appli-
C)
ance, do not point pressurised water jets at
internal parts.
WARNING: draws attention on com-
D)
pliance with the rules. "Install in compliance
with the applicable regulations and use in
well ventilated premises only".
WARNING: draws the attention on
E)
compliance with the rules. "The Manufac-
turer declines all liability in case of failure to
comply with the installation and commis-
sioning instructions".
WARNING: watch out for hot surfac-
F)
es.
4

SAFETY DEVICES

SAFETY AND INFORMATION SIGNS

A
A
A
E
D
F
37M3202
C B
CE Marking: it indicates that the equipment
G)
is compliant with all relevant laws applicable
to the product.
WEEE symbol: it indicates that the appliance
H)
is subject to specifi c waste disposal regula-
tions.
SAFETY
G
A
H
3413910_ut_GB_rev.1