Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
6.3 - Fixing the runner on the adapter profile
The runner is secured to the adapter profile by means of two fixing
plates. The following figure shows the mechanism for inserting the
fixing plates onto the adapter profile.
Finally secure the runners with the dedicated M6x14 TE screws.
For the positioning dimensions of the runner with respect to the
panel, refer to the tables in the "installation dimensions" section
6.4 - Preparation of rear slow panels
Take the rear panel and secure the guide pulleys with the belt tensioner facing the passageway (see installation diagrams).
54
1
2
N.B. Pay attention to the direction of the plate which must be as
shown in the figure. Otherwise, the plate may release when the
screw is tightened.
1
2
(*reference paragraphs 5.4, 5.5, 5.6) depending on the type of
panel to be installed (slow or fast), in case of single or double
opening.
Publicidad
Tabla de contenido
