Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ProCore Edge North America
Positioning the Charger
CAUTION
The battery charger, when fitted with modules, can be
very heavy. Take precautions to avoid injury when
moving the charger.
Use appropriate material handling aids (e.g., a pallet
truck) to move the charger into position. It is
recommended to make use of a lifting hoist (with straps
or chains) wherever possible, especially when the
charger is raised above ground level.
Lifting eyebolts (M8 thread) can be attached to four
locations on the top panel of the charger to aid the
process (Figure 5). Remove the filler screws with
a 4-mm hex key before attaching the lifting eyebolts.
Figure 5 Attaching Points for M8 Lifting Eyebolts,
31241-03-0202 Page 10 of 69
Top-panel View
Webasto Charging Systems, Inc.
IOMM
Publicidad
Tabla de contenido
