Weighing An Animal; Changing Indicator Settings - Tru-Test S2 Guia De Inicio Rapido

3
Before you begin:
1. Move the animal onto the platform.
2. When the stable light illuminates, the indicator has locked onto the
animal's weight.
3. Move the animal off the platform.
Note:
problems with inaccurate or unstable weights, make sure that the bars are
firmly secured to the concrete floor and free from stones or dirt and that the
load bars are properly connected to the indicator.
4
Data Link enables you to change settings on the indicator such as displaying
metric or imperial measurements during weighing.
1. Ensure that your PC has internet connectivity and download the Data Link
PC Software from livestock.tru-test.com/en/applications/datalink.
2. Connect the indicator to your PC with the supplied USB cable or via
Bluetooth
3. Launch Data Link on your PC; click
6

Weighing an animal

Ensure that the indicator is displaying 0.0. If not, press
If the indicator is not displaying 0.0 between animals or there are

Changing indicator settings

®.
, and Settings.