Establish Connection To The Computer; Tool; Factory Settings - WIKA GD-20 Manual De Instrucciones

5. Commissioning, operation

5.4.1 Establish connection to the computer

Interface converter
RS-485 USB
EN
5.4.2 Modbus

tool

®
The software can be downloaded free of charge from the WIKA homepage: https://de-de.wika.de/download_software_
gas_density_sensors_de_de.WIKA
After wiring and installing the software of the interface converter or copying the Modbus
can be started.
System requirements
At least Microsoft
®
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
5.4.2.1

Factory settings

The COM port allocated by the interface converter on the PC must be set for access to the gas density sensor. Upon
delivery, the address is set to 247 and the baud rate is configured to customer specification.
With these settings, the gas density sensors can be read via the button "Read from instrument".
Configuration
Tag number: WIKA
■
Address: 247
■
Baud rate: Customer-specific
■
Parity: Customer-specific
■
54
All manuals and user guides at all-guides.com
Voltage supply
+
-
Windows 7 (32-bit)
®
WIKA operating instructions gas density sensor, model GD-20
tool software, the program
®