Tabla De Contenido - SHOWJOE iON13SS Manual Del Operador

4. The iONMAX iCHRG40 lithium-ion battery charger has no
serviceable parts.
Replacing the Auger
m
WARNING!
Make sure to turn off the switch and
remove the battery before performing any maintenance task
on your cordless snow shovel.
1. Disassemble the left side cover by removing the five (5)
screws that hold it in place (Fig. 12).
Fig. 12
2. Remove the belt from the drive wheel (Fig. 13).
Fig. 13
3. Remove the screws and the bushings from the drive wheel
(Fig. 14).
Fig. 14
Belt
Drive wheel
Screws and
bushings
Drive wheel
12
4. Disassemble the right side cover by removing the five (5)
screws that hold it in place (Fig. 15).
Fig. 15
5. Secure the auger as you disassemble the auger assembly
nut (Fig. 16).
Fig. 16
Auger assembly nut
6. Remove the auger axle set (Fig. 17).
Fig. 17
Auger axle set