Getting Started; Important - Autel OTOFIX D1 Pro Guía De Referencia Rápida

EN

Getting Started

IMPORTANT: Before operating or maintaining this unit, please read these
instructions carefully, paying extra attention to the safety warnings and
precautions. Failure to use the unit correctly may cause damage and/or
personal injury and will void the limited product warranty.
1
2
• Insert the V1 into the vehi-
cle's DLC, which is generally
located under the vehicle
dashboard.
• Press and hold the Power/
Lock button to turn on the
tablet.
3
BT
OR
4
• When the V1 is properly connected to the vehicle and tablet, the VCI status
button on the bottom bar of the screen will display a green badge at the bot-
tom-right corner indicating the tablet is ready to start vehicle diagnosis.
• Pair up the tablet with V1
via Bluetooth to establish a
communication link.
• Pair up the tablet with V1
via USB cable to establish a
communication link.
NOTE: The tablet and V1 are
configured to automatically
synchronize with each other
on the initial use, therefore,
the pairing is not required.
EN