Solvis SolvisMax Futur Instrucciones De Montage página 11

SolvisMax Futur / SolvisMax Solo – Installation
a) Front flange insulation
• Mount the insulation parts with the 8mm hexagon sock-
et bolts and U-shaped washers as shown.
Do not remove the small insulation parts in the centre. If
necessary, these are removed if a burner is retrofit-
ted later.
4. Mounting the console
• Position the console in front of the storage tank.
• Align the console to the required height using the ad-
justable feet and screw on the four console brackets.
• From storage tank size 456: Install the two console at-
tachment frames on the console and screw on each one
with two M6 nuts and washers as shown.
M 30-M – Subject to technical changes 05.07
Mounted front flange insulation
Mounted console
Mounting the console attachment
11