Wired Connection Switch To Wi-Fi Connection - ieGeek ig20 Manual Del Usuario

Wired Connection Switch to Wi-Fi Connection

1. Please follow the steps above to connect the camera to the APP.
2. Enter "Wireless setting" - "Get the wireless network around the
device" to choose the Wi-Fi you want to connect. After you enter
your Wi-Fi password, it will say "Wireless setup successfully".
3. Waiting 60 seconds as this camera needs to reboot and you
can't tell any changes during the reboot.
4. Then the camera will show online.
5. Unplugged the Ethernet cable.
6. Waiting for about two minutes to reboot the camera and restart
your APP.
6