Switching On The Machine - Raider RDP-SPC20 SOLO Manual Del Usuario

16 www.raider.bg
Failure to follow these instructions risks damaging the treated surface!
Velcro allows easy replacement of polishing / grinding accessories.
- Use the sponge to apply a polishing agent.
• Make sure that the sponge is free of foreign bodies.
• Spread the polishing paste evenly on the polishing pad. Do not apply the paste directly on
the surface to be polished.
• Do not switch the polishing machine on or off when it is placed on the surface to be
polished.
• Start working on large, flat surfaces, such as the hood, trunk and roof.
• Strive for your movements to be as correct as possible.
• Important! Allow the polishing machine to slide on the polishing surface. Do not apply
pressure!
• Then start polishing smaller surfaces (doors for example)
• Use the felt attachment to perform effective polishing.
• Make sure the fleece attachment is free of all foreign bodies.
• Remove the layer of paste in the reverse order in which you applied it.
• Important! Do not apply pressure to the polishing machine!
Useful tips
• For optimal paint protection, you should polish your car 2 to 3 times a year.
• Wash your car at least once every 2 weeks. Avoid using household detergents as they can
damage the paint.
• Wash your car with a clean sponge, starting from the top down.
• Remove all insects, bird droppings and tar stains from the paint.
• If you use any window cleaner, spray it first on a towel and not directly on the windows to
prevent the detergent from getting on the paint.
6
5
4
3
2
1
900
3.1. Use as a sanding machine.
Use sandpaper for sanding purposes.
Velcro allows easy replacement of sandpaper.
• Place the sandpaper with the entire surface on the sanding disc.
• Switch on the machine and place it with light pressure on the part with rotating movements or
move it back and forth, or up and down.
• Use coarse sandpaper for rough sanding and fine sandpaper for fine sanding. The best way to
find the right sandpaper is to do a few samples with different types of sandpaper.

4. SWITCHING ON THE MACHINE

• Press the trigger switch to start the machine.
5. TROUBLESHOOTING
If the machine cannot function properly, the number of possible causes and appropriate
solutions are given below:
1. The electric motor heats up:
• The engine is overloaded.
2400 min
-1