Control Box Buttons; Button Functions - Polaris Scout 42 iQ Manuel Du Propriétaire

Polaris Robotic Pool Cleaner | Owner's Manual
®
1
Figure 3. Submerge the Cleaner Vertically
3. Ensure the unit sinks to the bottom of the pool
and does not float.
2
Figure 4. Cleaner Sinking to the Bottom of the Pool
4. Place all of the floating cable in the water to
allow free movement in your pool from the
central point. Spread out the floating cable
ensuring there are no kinks or coils in the cable.
Cleaner
Cleaner
Do not use an extension cord.
Figure 5. Pool Entry Point for Optimal Patterning
4.2

Control Box Buttons

The control box can be used to initiate basic
cleaning features and to connect the device to home
Wi-Fi (connected models only).
For more information on connecting your cleaner to
Wi-Fi (connected models), see Installing iAquaLink
section.

Button Functions

Start / Stop Cleaning
Select Cleaning Mode
Remove cleaner from the pool
Initiate connection and set up
iAquaLink control*
®
*not available on all models
Not Recommended
Caddy /
Control Unit
Recommended
Entry Point
WARNING
ENGLISH
®
Page 7