Turning On The Clearreader Basic; Standby Mode; Turning Off The Clearreader - Optelec ClearReader+ Basic Manual Del Usuario

Optelec
Turning on the ClearReader
To turn on the ClearReader
hand side. The start-up process will take approximately 40 seconds. You will
hear a series of beeps to indicate that the ClearReader
followed by the start-up sound. Now the Power indicator is lit up and the
+
ClearReader Basic is ready to use.

Standby mode

+
The ClearReader Basic will go into standby mode by pressing, and holding down the Back button
and Forward button for 2 seconds. The standby sound will be played, the Power indicator will start
blinking and the ClearReader
Basic from standby, press the Power button. After 40 hours the ClearReade
down. If switching-on the ClearReader
take approximately 5 seconds.

Turning off the ClearReader

Press the Power button to power down the ClearReader
sound will be played and the Power indicator will turn off.
27
All manuals and user guides at all-guides.com
+
Basic
+
Basic, press the round Power button on the right-
+
Basic will go into standby mode. To wake up the ClearReader
+
Basic from the standby mode, the start-up process will
+
Basic
+
Basic is starting up
+
Basic completely. The power down
+
ClearReader Basic
+
r+
Basic will power
English