Overview Of Error Messages; Technical Data - Bürk Mobatime K 600 Manual De Instrucciones

Dispositivos de registro de tiempo
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 34
8. Overview of the error messages
01
Swapped insertion of the time card
E01 (only K675)
02
Interference of the print head motor
03
Interference of the cart intake (motor)
E50 (only K675)
The barcode of the encoded time card
cannot be read.
E51 (only K675)
The time card was inserted 2 x at the same
time or there are already more than
6 stamps on the time card.
Caution
1. The device is intended for indoor use only. Do not set it up outdoors or where it is
exposed to rain, moisture, mechanical shock or vibrations, or close to radiators or in
dusty environments.
2. Only connect the device to a power source with the prescribed voltage.
3. Observe that no liquids or metal objects enter the device.
4. This device must not be operated with a damaged mains line or damaged plug or
after interference or any damage to the device.
5. Return to an approved customer service for examination, repair or setting of the
device.
6. Before renewed commissioning of the device, pull the plug from the socket and
have the device reviewed by qualified specialists.
7. For PLUGGABLE DEVICES, observe that a socket must be present in the proximity
of the device and easily accessible.

9. Technical data

Rated voltage
Power consumption
Ambience conditions
Dimensions H x W x D
Weight
Data retention at mains failure
220-240V (110-120V) 50/60 Hz 0.22 A
Observe the voltage indication on the rating plate.
51 W
0°C to 40°C
Rel. humidity10%-80% (no condensation)
22.5 x 19 x 10.5 cm
2.0 Kg
Approx. 3 years by lithium battery CR 2450 TVB
Page 12
Insert correct side of the card
.
Inform service
Inform service
Clean the barcode or use a
new card.
Wait for 1 min. or use a new
card.
© BÜRK MOBATIME GmbH

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

K 675

Tabla de contenido