Using The Energy Control Function (Optional); How To Use Air Purification - LG AP09RT Manual Del Propietário

Using the Energy Control
Function (Optional)
1
Turn the appliance on.
2
Press ENERGY CTRL button.
• Press ENERGY CTRL button repeatedly to
select each step.
1 step
NOTE
• 1 step : The power Input is decreased by 20 %
compared to rated power input.
− is displayed on the display screen.
• 2 step : The power Input is decreased by 40 %
compared to rated power input.
is displayed on the display screen.
−
• 3 step (Optional) : The power Input is
decreased by 60 % compared to rated power
input.
is displayed on the display screen.
−
• (1 step), (2 step) is displayed on some
indoor units.
• This function is available with Cooling Mode.
• Capacity may decrease when Energy Control
mode is selected.
• Desired temperature is displayed about 5
seconds if you press FAN SPEED,
button.
• Room temperature is displayed about 5
seconds if you press
seconds.
• When connected to the Multi Outdoor unit, this
function may not be supported.
2 step 3 step
or
button for 3
JET
MODE
ROOM TEMP [3 s]

How to Use Air Purification

Ionizer and air purification filter make the indoor air
pleasant.
• Press AIR PURIFY button to start the air
purification operation.
is displayed on the display screen.
−
Using Air Purification During
Operation Modes
• During cooling, dehumidification, heating or
auto changeover operation, if you press AIR
PURIFY button, you can use air purification
operation at the same time.
• During air purification operation, if you
press MODE button, you can use cooling,
dehumidification, heating or auto changeover
operation at the same time.
Smart Air Purification
• Dust sensor detects the indoor air
contamination level, and if overall cleanliness is
Orange (Bad) or more, it automatically starts air
purification operation. When overall cleanliness
reaches Green (Good), air purification
operation stops. If you do not want smart air
purification operation, clear by pressing AIR
PURIFY button. Until you turn off the product
and turn on again, air purification operation is
not operated automatically.
• It works only in overall cleanliness function
applied model.
EN
25