Invision REVOLUTION Serie Manual Del Propietário página 16

continuously. There are 5 speed options to
choose: 2X, 4X, 8X, 16X, and 32X.
20. FF (Fast Forward)
Press this button to search disc forward
continuously. There are 5 speed options to
choose: 2X, 4X, 8X, 16X, and 32X.
21. SETUP
Navigate the Setup Menu. Please refer
to the following pages to configure the
system: General Setup Page, Audio Setup
Page, Preference Page, and Password
Setup Page.
22. EJECT
Eject the disc from the disc compartment
or load the disc into the disc compartment.
23. TV-Monitor B (If available)
Transmit IR codes for TV mode of Monitor B.
24. 24. DVD-Monitor B
Transmit IR codes for DVD mode of Monitor B.
25. SOUND AROUND SELECT (If available)
Select a FM transmitter channel. There are
6 channels: CH1: 88.3MHz; CH2: 88.7MHz;
CH3: 89.1MHz; CH4: 89.5MHz; CH5:
89.9MHz; CH6: 90.3MHz.
26. PIX (Picture Selection)
Each time the button is pressed, the picture
adjustment OSD, cycles through bars for
BRIGHTNESS, CONTRAST, SATURATION,
HUE, SHARPNESS, IR HEADPHONE, and
RESET. Once the desired adjustment bar
is displayed, use the UP/DOWN button
to adjust the setting. The bar display will
automatically disappear, if no adjustments
are made within 6 seconds or if any button
is pressed.
27. REPEAT
Press this button to switch the repeat mode
by ALL, TITLE, CHAPTER and cancel the repeat
mode while playing DVD-video. Other disc
types such as VCD, CD, and SVCD that only
have two repeat modes that can be selected:
TRACK and ALL
16 Button Function Descriptions
All manuals and user guides at all-guides.com
28. A-B (Except MP3)
29. R-S (If TV mode is available)
30. ERASE/ADD (If TV mode is available)
31. AUDIO
32. ANGLE
33. GOTO
34. DISPLAY
Note: Both repeat functions of VCD and SVCD
need the PBC status set to ON when available.
Repeat from point A to point B.
The button selects between Antenna and
CATV modes.
When tuned to a channel, press the button
to store or erase the channel from memory.
The stored channel numbers are displayed
in green on the screen, and the non-stored
channel numbers are in red. When the SKIP
mode is on, the device will be tuned to
only the stored channels when using the
UP/DOWN buttons.
Press this button if the current disc has
different language options.
Press this button repeatedly until you have
reached your desired language option.
View with a different camera angle (The
button takes effect only on the DVD that
supports frames with multiple angles).
Press this button repeatedly until you have
reached your desired viewing angle.
For the DVD, pressing this button will enter
the menu to set the Title/Chapter/Audio/
Subtitle/Angle/Title Time/Chapter Time/
Repeat Mode/Time display mode while
normal playing. For the SVCD and VCD,
pressing this button can enter the menu
to set the Track/Disc Time/Track Time/
Repeat Mode/Time display mode during
normal playback.
Show information on the screen including
title, chapter/track, time elapsed, and time
remaining, or turn off the display.