Intended Use; Safety Informations - BGS technic 1246 Manual De Instrucciones

INTENDED USE

The flywheel-side radial seal carrier together
with radial seal ring and the speed sensor is one
unit. If the radial seal ring is defective, the entire
unit must be renewed. This tool is used to mount
the flywheel-side radial seal ring carrier
(crankshaft radial seal ring) and it is to be used
as OEM T50010. The tool is suitable for VW
Crafter, year 2006-2013 with following engines:
2.5L TDI, engine codes: BJJ, BJK, BJL, BJM
2.5L Blue TDI, engine codes: CEBA, CEBB,
CECA, CECB,
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATIONS


Do not use the tool if parts are missing or damaged.

Use the tool for the intended purpose only.

Never place the tool on the vehicle battery. There is a risk of a short circuit.

Be careful when working with the engine running. Loose clothing, tools and other objects can
be caught by rotating parts and cause serious injury.

Keep children and other unauthorized persons away from the work area.

Do not allow children to play with the tool or its packaging.

Be careful when working on hot engines because of the risk of burn injuries.

If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.

This manual serves as a brief guide and does not replace a workshop manual. Always refer
to the vehicle-specific service literature, particularly the technical data such as torque values
and instructions for disassembly/assembly, etc.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Crankshaft Oil Seal Mounting Tool
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 1246
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed