Menu Reset - Nice M-BOARD Instrucciones De Seguridad Y Advertencias Para Instalación, Uso Y Garantía

26 - MENU RESET

In this mode it is possible to reset all settings of the control panel or
only the path, the controls are not deleted in this mode *.
To execute the command, set the PROG switch to the position as
shown in the figure below. Define which command you want to exe-
cute according to the table below, view the number of times the LED
flashes, press the LEARN button if you need to increase the number
of times the LED flashes. After the procedure, return the DIP switches
to their original position.
IMPORTANT!!! Before pressing the LEARN button, carefully ob-
serve the table below, because once you reach the number of ti-
mes the LED flashes, the control panel executes the command
shown in the table below.
Once selected, return the PROG switch to the OFF position (all
down) for the control panel to save the configuration.
ON
1 2 3
LED blinks 4 times Reset path
LED blinks 5 times Total reset
ENGLISH
DP
4 5 6 7 8
85