SKP Pro Audio COMBO I Manual De Uso página 3

8. - CD/TAPE level control
Adjust volume for stereo input.
Control level for an audio source(CD,Tape deck etc.)
9. - Digital delay master volume.
Adjust level for the digital effect on the master signal.
10. - Digital delay depth control.
Adjust amount of depth in the digital delay signal.
Adjust echo to reverb effect.
11. - Digital delay time control
Control length and number repeat.
REAR Panel
1. - Send output connector
Loop connection.
Unbalance line mono output.
1/4" jack output connector style.
When used, takes the signal the master output, interrupting the signal that goes to
the internal amplfier. (This signal goes to the signal processor such
as,delays,reverbs,compressor)
2. - Return input.
Loop connection
Unbalance line mono input.
1/4" jack output connector style.
When used, brings the signal back to the amplifier input
(This signal comes back from the signal processor such as delays,reverbs,
compressor,etc)
3. - Speakers output.
1/4" connector output.