Turn On; Select The Therapeutic Mode; Steps To Set A New Program - intensity TWIN STIM III Manual De Instrucciones

All manuals and user guides at all-guides.com
Every patient responds to electrical stimulation differently and
their needs may vary from the conventional settings suggested
here. If the initial results are not positive, speak to your
physician about alternative stimulation settings and/or
electrode placements. Once an acceptable location has been
achieved, mark down the electrode sites and the device
settings, so the patient can easily continue treatment.

4.5 Turn on

Before using the device for the first time, you are strongly advised
to take careful note of the contraindications and safety measures
detailed at the beginning of this manual (Safety information), as
this powerful equipment is neither a toy nor a gadget! In order to
turn on the device, Press and release [ ] button and the operation
page will appear on the screen.

4.6 Select the Therapeutic Mode

There are 2 therapeutic modes available — TENS and EMS.
The therapeutic mode can be selected by pressing the [M] control.
Caution:
Consult your physician for your suitable therapeutic mode

4.7 Steps to Set a New Program

4.7.1 TENS Setting
Press the [S] button cycle to enter the setting state. The settings
can be adjusted according to the following steps:
1) Set the Therapeutic Program
There are 4 programs in TENS therapeutic
mode available — Burst (B), Normal (N), Pulse
Width Modulation (M), and Pulse Rate
Modulation (M1). The therapeutic program can
be selected by pressing the [▲] and [▼]
button. When you choose to "B" program,
program [B] outside of the box will be flashing.
23