Techem compact V Instrucciones De Operación página 8

Display levels
The heat meter has two display levels - the readout level and the service level:
A long press of the button switches between the display levels. A short press of the
button jumps to the next display.
2
!
In the device number display, the number next to the display identifier is the first
digit of the device number.
Key for
2
1 Readout level
1.1 Cumulated energy since
commissioning
1.2 Display test "everything on"
1.3 Display test "everything off"
1.4 Display test "UHF ON/OFF"
1.5 Due date value
1.6 Due date*
* The production date is displayed here before the first due date.
LT = long button press (> 3s)
KT = short button press (< 3s)
8
2 Service level
2.1 Current flow rate
2.1 Inlet temperature
2.3 Outlet temperature
2.4 Temperature difference
2.5 Current performance
2.6 Cumulated volume since
commissioning
2.7 Next due date
2.8 Device number
2.9 Firmware version number
2.10 Firmware check sum