Regeneration Cycle - Kinetico POWER LINE Pro Serie Manual Del Usuario

Regeneration Cycle

(NOTE: These may need to be adjusted based on application.)
Step
Step 1
Step 2
Step 3
Step 4
Step 5
NOTE: Depending on system pressure and other factors, it is possible to observe
flow to drain in the rest cycle.
- When the valve is between positions, the display will flash the number of the step it
is moving toward.
- The default time at which regeneration will occur is 12:00 a.m.
- If system loses power and no backup battery is installed, it may return to default
settings which could be different from those entered at start-up. Consult with your
dealer.
The motor's run direction during a particular regeneration cycle step is indicated
by the rotation direction of the last 2 digit displays.
5-
Example:
8
Common Cycle Step Times
Air Release (non-adjustable)
Backwash
Rest
Air Replenish
Rapid Rinse
Minutes
6
12
5
45
5