Scroll The Frozen Image; Power Saving Mode; Color Mode Selection - Optelec ClearView GO Manual Del Usuario

Optelec ClearView GO

4.4. Scroll the frozen image

Adjust the zoom level as desired to frame the entire area you would like to read.
Then, press the Snapshot button ③ to freeze the image.
When you press the Zoom wheel ④ while in the frozen image, a horizontal line
marker appears. You can move this line by rotating the Super Function Key ⑦.
You can zoom in/out on the frozen image with the Zoom wheel ④. When the
image is magnified, you can pan around the frozen image using the up/down and
left/right direction keys around the Super Function Key ⑦. When you pan to the
end of a frozen image, you can advance to the next paragraph or line by
releasing the left or right direction key and pressing it again.
At any time while panning the image, your current reading position is displayed
by pressing and holding the Natural Color button ⑥. The location of the
magnified area is shown within the entire field of view.

4.5. Power saving mode

If you leave the unit turned on and unused for 10 minutes, the LCD screen turns
off to conserve battery power. If the unit is left for three additional minutes, the
power is automatically switched off. For more information about how to adjust
these times, refer to the "Power saving mode" section in chapter 5.3.

4.6. Color mode selection

Press and hold the Color Mode button ⑤ and rotate the Zoom wheel ④ to cycle
through the available color modes. For more information about how to select
colors, refer to the "Color Mode" section in chapter 5.2.
• Color Mode button ⑤ + Zoom wheel ④, Right: Next color mode
• Color Mode button ⑤ + Zoom wheel ④, Left: Previous color mode
• Press the Color Mode button repeatedly to cycle through the available color
modes.
20 English