General Warning - Thomas Regout BalanceBox 400 Manual De Instrucciones

EN
1. How to use this manual
1. Read the manual carefully before you install the
BalanceBox®.
2. Carry out the actions fully and in the given sequence (page
14-24).
3. The BalanceBox® guarantee is voided if the product is not
correctly installed or modified in any way.
2. Warning symbols used
Sharp edges
Wear gloves
Physical load
Two people required
Entanglement hazard
WARNING: Can cause personal injury or equipment
damage.
3. Intended use
The BalanceBox® is a system that compensates the mass of
vertically moving applications to ease vertical movement of the
application.
The BalanceBox® complies with:
Machinery Directive (2006/42/EC) NEN EN 14434

4. General warning

The application may only be attached to or removed from the
BalanceBox® when the BalanceBox® is in closed position. The
BalanceBox® is under strong spring force.
Only operate the BalanceBox® with an adequately balanced
application attached to the application frame.
Do not remove any parts of the BalanceBox®. Only the finishing
cover can be removed.
5. Mounting fittings
Mounting fittings are not included with the product. Obtain advice
from a specialist.
6. Disposal of the BalanceBox®
Springs should be unattached before disposal of the BalanceBox®.
Sort the BalanceBox®, the accessories and the packaging for
environmentally friendly recycling.
7. Copyright © 2011
Nothing contained in this publication may be copied and/or
published by means of printing, photocopying, microfilm or any
other means, without prior written permission from Thomas
Regout International B.V.
The instructions in this manual are originally written in English.
8. Guarantee terms and conditions
Download and read the Thomas Regout
International guarantee terms and conditions at
www.thomasregout.com
9. Setting the springs
Adjust only the outer springs:
- Adjust the height of the outer springs equally.
- Make sure that the application is balanced.
- Increase the spring tension as much as possible.
- Make sure that the application does not move up.
Never adjust the inner springs!
BalanceBox®® 400
BalanceBox®® 650
10. Maintenance
No maintenance required.
3 / 12