Bioventus EXOGEN Manual Del Usuario página 33

Recommended separation distances between portable and mobile
RF communications equipment and EXOGEN
EXOGEN is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of EXOGEN can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and EXOGEN as recommended below, according to the maximum
output power of the communications equipment.
Rated maximum output power of
transmitter – watts (W)
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation applicable to the frequency of
the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
Labeling LBL-000319 [D] RELEASED
Separation distance according to frequency of transmitter – meter (m)
150 kHz to 80 MHz
d = 1.2 √P
0.12
0.38
1.2
3.79
12.00
Test Report # 100972305ATL-002, 02/07/2013. Testing performed by: Intertek, 1950 Evergreen Blvd, Suite 100, Duluth, GA 30096.
80 MHz to 800 MHz
d = 1.2 √P
0.12
0.38
1.2
3.79
12.00
800 MHz to 2,5 GHz
d = 2.3√P
0.23
0.73
2.30
7.27
23.00
30