Cisco Systems LINKSYS BEFSR81 Instalación Rápida página 7

5 PPTP
a PPTP is a service used in
Europe and Israel (if you are
using a PPTP connection, you
may need to check with your
ISP for the necessary setup
information). When you are fin-
ished, go to Step F.
b Enter the IP Address, Subnet
Mask and Default Gateway
address provided by your ISP .
c Enter the User Name and Pass-
word provided by your ISP .
d Click the Save Settings button.
e Click the Status tab, and then
click the Connect button to
start the connection.
f Go to Step F.
6 Heart Beat Signal
Heart Beat Signal is a service used in
Australia only. If you are using a Heart
Beat Signal connection, check with
your ISP for the necessary setup infor-
mation. When you are finished, go to
Step F.
E
Depending on the setup infor-
mation from your ISP , you may
need to provide a host name
and domain name for the
Router. The Host Name and
D
5
D
6
7