Connecting To A Computer - Telefunken DPF Serie Manual De Instrucciones

- Press the "Right/Left" keys to set the minutes
Press the "Up" key to go back.
- Programmed automatic shutdown
This setting lets you activate or disable programmed shutdown for your TELEFUNKEN frame.
Select the "Shutdown" option onscreen using the "Up/Down" keys on the remote, then press the
"Right/Left" keys to choose:
. On
. Off
Programmed automatic shutdown time
-
Select the "Automatic shutdown time" option onscreen using the "Up/Down" keys on the remote, then:
- Press the "Right/Left" keys to set the hour
- Press the "Down" key to select minutes
- Press the "Right/Left" keys to set the minutes
Press the "Up" key to go back.
- Frequency of automatic start-up and shutdown
Select the "Shutdown" option onscreen using the "Up/Down" keys on the remote, then press the
"Right/Left" keys to choose:
. Once
. Everyday
. Monday-Friday
. Weekend
Rebooting your frame
-
If the frame is handled incorrectly, it may be useful to reset the frame to its default settings. To do so,
select the "Reset" option onscreen using the "Up/Down" keys on the remote, then press the "Enter"
key.
Note: After rebooting, the language selection screen will appear during the following start-up, just as it
did for its first use.
V.

Connecting to a computer

It is possible to transfer files into the frame by connecting it to your personal computer. To do so,
connect your frame to the computer with a USB cable (mini-USB port on the frame, and standard
USB port for the computer), then turn on your frame: the frame's screen will show "PC connection..."
Return to normal operation after disconnecting
On your computer, the following dialog box will appear:
Non contractual document subject to change in case of typographical errors (Mktg0609)
14