Sricamsales - Sricam MiNi IP Camera Manual De Usuario Rápido

1) After Wi-Fi setting failed, You will get the following tips:
Wi-Fi Setting
Wi-Fi setting failed
404087
Network busy! Please try again.
First, please confirm whether the device
make beeping sound. If not beeping, you
need back to the first step of Add New Device?
If you heard continuous beeping sound, check
whether input incorrect Wifi password, and try
again
If this setting failed several times, please try
"QR Code Setting"to configure Wifi
Try Again
FAQ1-2
2) Click "QR Code Setting", and input Wi-Fi password, Click "Next".
You will get a Wi-Fi QR Code on your smartphone, please direct put the lens of the camera to the QR
code within20-30cm and move forward slowly. when you hear a clash sound from the camera, click
"Next" the camera successfully connected to Wi-Fi.
QR Code Setting
Move camera back and forth slowly scan
the QR code above at the distance about
20-30cm, after hear a beeping sound, tap
"Next"
Next
FAQ1-4
Note:
When scan the QR code, maybe you need try some different position and angle for scan succeed.
QR Code Setting
English
press "Reset" button with the Reset
pin for 10 seconds untill hear a clash
sound from the device,then input
Wi-Fi password and tap "Next"
FAQ1-5
-6-
QR Code Setting
404087

Sricamsales

Input Wi-Fi Password
Next
FAQ1-3