RDI transform Instrucciones De Instalación página 23

CABLE RAIL | STAIR APPLICATION
Warning: Always wear safety goggles.
Transform Cable Rail MUST be installed on 4" x 4" wooden posts sleeved with
Transform post sleeves to support cable tension!
It is RECOMMENDED to install Cable Stair Rail with the Transform bottom beam.
If NOT using bottom beam, it is important to note that your installation will vary
depending on placement of posts, stair rise and run, stair angle, and bottom space.
WITH NO BOTTOM RAIL
If not using bottom rail, follow these general guidelines for installing cable rail without bottom rail. For 36" finished height, 10 fittings will
be used per post, for 42" finished height, 12 fittings will be used. Your installation may vary based on stair angle and post placement.
23