The DTL+ G3 will now format the secure data partition (Figure 3.5) and notify you when it is complete
(Figure 3.6.)
Note: If operating under Windows XP in Non-Admin mode, the 'Format' routine
will take longer than formatting in Admin mode.*
6. Click 'OK' to continue.
Figure 3.5 – Formatting DTL+ G3
Initialization complete.
*Note: Times may vary based on system hardware and the capacity of the DTL+ G3 drive.
Document No. 480G3001-001.A04
®
DataTraveler
Locker+ G3 USB-to-Cloud
Figure 3.6 – Format Complete
Page 8 of 24