Echo SRM-251 Instrucciones De Instalación

For Models: SRM-251, SRM-251E, SRM-251SB S/N 08001001-10999999
YOU MUST INSTALL THE U-HANDLE WHEN USING BRUSH OR CLEARING BLADES. A METAL
SHIELD IS REQUIRED FOR ALL BLADE USE. You must read and understand the Operator's Manual and
Trimmer/Brushcutter Safety Manual before installing or using this kit. Failure to follow all instructions, or operation
without specified shield, handle, and harness, can result in serious personal injury. The type of blade used MUST be
matched to the type and size of material cut. An improper or dull blade can cause serious personal injury. Blades
MUST be sharp. Dull blades increase the chance of kickout and injury to yourself and bystanders.
KIT CONTENTS
1. Offset U-Handle w/Throttle Handle
Assembly and Upper U-Handle Bracket*
2. Lower U-Handle Bracket
3. Lower U-Handle Bracket Clamp
4. 5 mm x 30 mm Hex Socket Bolt
w/Lockwasher and Flat Washer (3).
5. 8 mm x 55 mm Long Hex Head Bolt
6. 8 mm Flat Washer
7. 8 mm Square Nut
8. Plastic Cable Clamps (2)
9. Harness Ring w/Clamp and Screw
10. Spring Washer 5mm (4)
11. Nut 5mm (4)
12. Shield Bracket
13. Screw 5x10 (3)
14. Nut 10, left hand
15. Split Pin 2x22
16. Adapter Plate, lower
17. Adapter Plate, upper
18. Collar
19. Screw 5x8 (3)
20. Metal Shield
21. Shoulder Harness
w/Quick-release Hook
X7502234200
I
U-HANDLE COMBO KIT P/N 99944200555
WARNING
21
15
I
NSTALLATION NSTRUCTIONS
U-H C
ANDLE OMBO
DANGER
5
6
1*
3
2
7
9
8
20
19
17
18
16
13
14
K
IT
4
11
10
12
10
11
10
11
11
10
X750008210
04/05
1*