Additional Information - Universal Electronics Cox Guía Del Usario

Cox Manual - final - 082103.qxd
PROBLEM: No volume on a second TV.
SOLUTION: Follow instructions in Changing Volume Lock
(see previous page).
PROBLEM: CH+ , CH –
RCA TV.
SOLUTION: Due to RCA design (1983–1987), only the
original remote control will operate these
functions.
PROBLEM: Changing channels does not work properly.
SOLUTION: If original remote control required pressing
ENTER to change channels, press
the remote control after entering a channel
number.
PROBLEM: Tried "Search Method" and still could not
find a working code.
SOLUTION: Try the "Search Method" again after clearing
out the device key as follows: Press and hold
SETUP
until mode key blinks twice, then
release. Next enter
release the mode key to be cleared twice.
PROBLEM: Remote control does not turn on Sony or
Sharp TV/VCR Combo.
SOLUTION: For power on, these products require pro-
gramming TV codes on the remote control.
For Sony, use TV code 0000 and VCR code
0032. For Sharp, use TV code 0093 and
VCR code 0048.

ADDITIONAL INFORMATION

This product does not have any user-serviceable parts.
Opening the case, except for the battery cover, may cause
permanent damage to your Cox Universal Remote Control.
Copyright 2003 by Universal Electronics Inc. No part of
this publication may be reproduced, transmitted, tran-
scribed, stored in any retrieval system, or translated to any
language, in any form or by any means, electronic,
mechanical, magnetic, optical, manual, or otherwise, with-
out prior written permission of Universal Electronics Inc.
8/21/03
, and LAST do not work for your
ENTER on
9 - 9 - 2 . Then press and
19
1:31 PM Page 19