Equipment'S Identification; Description Of The Equipment - GNATUS Optilight Color Manual Del Proprietário

EQUIPMENT'S IDENTIFICATION

Dear Customer
Congratulations for your excellent choice. When buying equipments with "GNATUS"
quality, you can be sure of the acquisition of products with a technology comparable to the
world's best in its kind.
This manual offers a general presentation of your equipment. Outlines important details
that might orientate you in its correct use, as well as in the solution of small problems that
might effectively occur.
We advise its complete reading and conservation for further consults.
Identification
Technical name: Equipment for tooth cleaning and photo polymerization of resins.
Brand: Gnatus
Model: Optilight Color

Description of the Equipment

Optilight Color is the latest generation of LED photo activation devices.
This abbreviation is the acronym for Light Emitting Diode, a totally different way
of emitting light, in comparison to the halogen conventional devices. Unlike traditional
equipments, which generate light in wide wave spectrum and a lot of heat, this technology
allows the emission of cold light in a precise wavelength for the activation of several dental
products apply.
LED technology, recently introduced in odontology, has brought several advantages
to photopolymerizers on direct restoration in composed resin. Besides infinitely more
durable, LEDs have become the most compact, ergonomic and easy-to-install and transport
equipments. The cold light emission and in precise wavelengths assure a safe polymerization
of activated composite by the camphorquinone, without the risk of tooth warming, pulp
injuries or discomfort for both operator and patients.
The safety and efficiency of the LEDs, now with high energy emission, are available to
all the clinical procedures that require light power for photo activation.
The wavelength from 450nm to 470nm associated with the high energy emitted by
Optilight Color enables the multi functionality of this device:
• Direct restoring processes: composite resins, ionomers and adhesives.
• Indirect restoring: laminated adhesive cementation, inlays, aesthetic pins and metal-
free diadems.
• Activation of material photo active as sealants, surgical cements and the basis
of a foraging.
Designed and built within the most advanced technology in order to provide results
within the specifications set by the highest world odontology authorities.
Equipped with a power supply with an automatic bi-volt key that allows to use the
equipment in any supply voltage between 100 to 240V ~ - 50/60Hz.
Digital control on the display in the handpiece itself.
Variation of choosing the operation time (5,10,15 and 20 seconds).
It has 3 application modes: Continuous, Ramp and Pulse:
• Continuous: Maximum mode and continuous light intensity (same luminosity from
the beginning to the end of the polymerization).
• Ramp: Gradual light intensity mode, increases gradually.
• Pulse: Pulse mode has cycles that oscillate at a fixed frequency.
26