Basic Use Airzone Think Thermostat; Temperature Settings; Advanced Use Airzone Think Thermostat; Settings Menu - Airzone RADIANT365 Manual De Instrucciones

BASIC USE AIRZONE THINK THERMOSTAT

Temperature Settings

On/Off. Pressing the icon, you will swtich on or off the zone where the thermostat is located.
ES
Temperature control. Select the set-point temperature (0.5 ºC) using the control bar.
EN
These are the available ranges for heating mode: 15-30 ºC. For cooling mode: 18-30 ºC. These ranges may vary based on the
efficiency level (Eco-Adapt) selected on the master interface.
FR
IT

ADVANCED USE AIRZONE THINK THERMOSTAT

PT

Settings menu

DE
Press the Setting Menu icon to access the parameters.
Sleep mode. Auto power-off timer of the zone. The available options are:
Off. The timing is off.
30. It activates the timing and switches off the zone after 30 minutes.
60. It activates the timing. After 30 minutes, the zone varies one degree its temperature. After 60 minutes, the zone
will switch off.
90. It activates the timing. After 30 minutes, the zone varies one degree its temperature. After 60 minutes, the zone
varies one more degree its temperature. Finally, after 90 minutes, it switches off the zone.
Zone navigation. Access any zone of the system to change the set-point temperature, switch it on or off or see all its
information.
Operating mode. If the Think thermostat is set as Master, the following modes are available:
Stop. The air conditioning system will be stopped regardless of the state of the rest of the zones. Moreover, all the
terminal elements (grilles, dampers, etc.) will stay closed.
Cool. In this mode, when any zone is generating demand (Set-point T< Room T), the system operates exclusively
in cooling mode.
Heat. In this mode, when any zone is generating demand (Set-point T > Room T), the system operates exclusively
in heating mode.
30