Clinician Only Section; Compliance Monitoring - Empi Phoenix Manual De Usuario

11. Clinician Only Section

This section is only intended for clinicians and the functions described in this section should not be operated by the patient.

11.1 Compliance Monitoring

The Empi Phoenix device is equipped with a compliance monitoring system. This allows you to monitor the usage of the
device by your patient between visits.
To access the compliance screen, simultaneously and continuously push on the Program
Decrease , Left Decrease Intensity and Right Decrease Intensity buttons while you
are in the Program Selection mode.
In the compliance screen, you will see the total time spent in each of the programs by switching
between the different programs (for this, use the P- and P+ keys).
P3 12:36
HOURS MINUTES
Note: Timer indicates hours and minutes instead of minutes and seconds when you are in the Compliance screen.
Compliance counters reset
To reset the compliance counters, press continuously and simultaneously for more than 3 seconds the Program Decrease
, Left and right Decrease intensity (same key combination as to access the compliance screen).
To exit the compliance screen, switch Off the device by pressing the ON/OFF switch.
28 Phoenix User's Manual