Starting Up For The ! Rst Time - Salva IVERPAN FC-18 Instrucciones De Usuario

4.6. Starting up for the • rst time
It is necessary to wait for about ONE HOUR after the installa-
tion before start-up. The oil of the cooling group carter might
have moved during the transport and cause jamming of said
group if the start-up is done too soon afterwards.
When it is started up for the first time, it is recommended to
switch the cooling group three or four times on and off before
letting it definetely switched on.
(1) Electrical connection.
(2) Solenoid valve.
(3) Adapter joint on the rubber input hose.
(4) 2 mts rubber hose water inlet.
(5) Water entry filter.
(6) Water inlet.
(7) Drain.
NOTE : FC-SR-11 model have not wheels.
salva
-90- Usuario_Iverpan2006_(c-f-i)011210