Maintenance / Technical Data - Quick QCC PLT 300 Manual De Uso Y Mantenimiento

QCC-PLT 300 - REV001A
CLEANING
The device requires no special cleaning procedure. Clean the front using a damp cloth, avoiding corrosive substances.
Do not apply liquids directly on the unit; they might penetrate and damage the device.
DISCONNECT THE POWER SUPPLY BEFORE CLEANING THE UNIT.
WARRANTY
Failure to comply with the prescriptions below will void the Warranty.
TECHNICAL DATA
MODEL
INPUT CHARACTERISTICS
Power supply
Power consumption
Control input
Power
GENERAL
Operating temperature
Storage temperature
Relative humidity
Housing protection
Casing material
Certifications
Housing
DIMENSIONS mm (inch)
87,5 (3 7/16)
F
In case of discordance or errors in translation between the translated version and the original text in the Italian language,
reference will be made to the Italian or English text.
F
Quick ® reserves the right to modify the technical characteristics of the equipment and the contents of this manual without prior
notice.
QUICK SPA

MAINTENANCE / TECHNICAL DATA

DMX or by clean-contact push buttons
150 W to 12 V / 300 W to 24 V
from +5°C to +50°C
from -40°C to + 70°C
80% non-condensing
Self-extinguishing nylon
13
QCC-PLT 300
10 ÷ 30 Vdc
max 12,5 A
IP 20
CE marking
for omega rail
EN