Warning Signs - Vision VGA TECHSPLITTER Manual De Usuario

USE ONLY DOMESTIC AC OUTLETS
Connecting the unit to an outlet supplying a higher voltage may create a fire hazard.
HANDLE THE POWER CORD WITH CARE
Do not disconnect the plug from the AC outlet by pulling the cord; always pull the plug
itself. Pulling the cord may damage it. If you do not intend to use your unit for any
considerable length of time, unplug the unit. Do not place furniture or other heavy objects
on the cord, and try to avoid dropping heavy objects on it. Do not tie a knot in the power
cord. Not only could the cord be damaged, but a short circuit could also be caused with a
consequent fire hazard.

WARNING SIGNS

If you detect an abnormal smell or smoke, turn off the amplifier immediately and unplug
the power cord. Contact your dealer or nearest Vision service centre.
PACKAGING
Save all packing material. It is essential for shipping in the event the unit ever needs repair.
IF ORIGINAL PACKAGING IS NOT USED TO RETURN THE UNIT TO THE SERVICE CENTRE,
DAMAGE IN TRANSIT WILL NOT BE COVERED BY WARRANTY.
REAR PANELS
1. Power Input
2. RGBHV (via 15-pin mini d-sub connector) input
3. RGBHV (via 15-pin mini d-sub connector) outputs
1 2 3
2