Software Installation - Interacoustics Affinity 2.0 Manual De Instrucciones

2.4 Software installation

To know before you Start Installation
You must have administrative rights to the computer on which you are installing the Affinity 2.0/ Equinox 2.0
Suite.
NOTICE
1. DO NOT connect the Affinity2.0 hardware to the computer before the software has been installed!
2. Interacoustics will not make any guarantee to the functionality of the system if any other software is
installed, with exception of the Interacoustics measurement (AC440/REM440) modules and
AuditBase, Otoaccess®, or Noah4 compatible Office Systems or later releases.
What you will need:
1. Affinity2.0 Suite Installation USB drive
2. USB Cable
3. Affinity2.0 Hardware
Supported Noah Office Systems
We are compatible with all Noah-integrated office systems which are running on Noah and Noah engine.
To use the software in conjunction with a database, make sure the database is installed prior to the
Affinity2.0 Suite installation. Follow the manufacturer's installation instructions provided to install the relevant
database.
Note that if you are using AuditBase you must ensure to launch this office system prior to this installation of
the Affinity2.0 Suite.
Installation on various Windows® versions
Windows® 7 (32 and 64 bit), Windows®8 and Windows®10 systems are supported.
Software Installation on Windows® 7
Insert the installation USB drive and follow the steps below to install the Affinity2.0 Suite software. To find
the installation file; click "Start", then go to "My Computer" and double click the USB drive to view the
contents of the installation USB. Double click the "AffinitySuiteSetup.exe" file to initiate the installation.
Affinity2.0 – Instructions for Use - EN Page 11