mundoclima MUENR-H7 Manual De Usuario E Instalacion página 66

Press the " " and " " buttons to adjust the
parameter, and press the "OK" button to save
the setting and return to the previous interface.
Press the "BACK" button to cancel the setting
and return to the previous interface.
e. Capacity adjust cycle:
Select "CAP ADJUST CYCLE", and press the
"OK" button to enter the interface. The
interface display is as follows:
SERVICE MENU
CAP ADJUST CYCLE
180S
OK
Press the " " and " " buttons to adjust the
parameter, and press the "OK" button to save
the setting and return to the previous interface.
Press the "BACK" button to cancel the setting
and return to the previous interface.
f. Hysteresis temperature:
Select "HYSTERESIS TEMP", and press the
"OK" button to enter the interface. The
interface display is as follows:
SERVICE MENU
HYSTERESIS TEMP.
OK
Press the " " and " " buttons to adjust the
parameter, and press the "OK" button to save
the setting and return to the previous interface.
Press the "BACK" button to cancel the setting
and return to the previous interface.
g. Anti-freezing
temperature outlet water:
Select "ANTI-FREEZING TEMP OF NORMAL
TEMP OUTLET WATER", and press the "OK"
button to enter the interface. The interface
display is as follows:
SERVICE MENU
ANTI-FREEZING TEMP. OF NORMAL
TEMP. OUTLET WATER
OK
66
2 C
temperature of normal
2 C